A
-
Activated carbon
Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2021, Pages 19-36]
-
Adsorption
Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2021, Pages 19-36]
-
Adsorptive Desulfurization
Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
-
Arundo donax
Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
-
Autoignition kernel
The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2021, Pages 1-18]
B
-
Biofuel
Influence of exhaust gas recirculation and TiO2 nanoadditives on performance and exhaust emission characteristics of ethanol/biodiesel/diesel blends in a compression ignition engine [Volume 14, Issue 3, 2021, Pages 59-97]
-
Biogas
Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
-
Biomass
Analysis and modeling of heat recovery boiler with using of new fuels (biomass) with view point of pollution reduction [Volume 14, Issue 2, 2021, Pages 63-86]
-
Bio-oil
Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
-
Box-Behnken design
Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
C
-
Catalytic Cracking
Six-lumped kinetic model for catalytic cracking of heavy gas oil over zeolite Y; considering deactivation catalyst [Volume 14, Issue 1, 2021, Pages 47-60]
-
CJ detonation
Numerical study of combustion characteristics for stoichiometric hydrogen-air mixture in rotating detonation engine (RDE) [Volume 14, Issue 1, 2021, Pages 73-94]
-
CO
Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
-
Coaxial shear injector
Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
-
Combined Propellant
Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2021, Pages 61-84]
-
Combustion
An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
-
Combustion
Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2021, Pages 100-122]
-
Combustion chamber
Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
-
Combustion chamber
Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
-
Combustion instability
Investigation of the Effect of Chemical Kinetics and Combustion Model on the Flame Transfer Function of a Diluent Premixed Gas Turbine Using LES [Volume 14, Issue 4, 2021, Pages 37-60]
-
Combustion model
Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
-
Combustion model
Investigation of the Effect of Chemical Kinetics and Combustion Model on the Flame Transfer Function of a Diluent Premixed Gas Turbine Using LES [Volume 14, Issue 4, 2021, Pages 37-60]
-
Combustion pollutants
Analysis and modeling of heat recovery boiler with using of new fuels (biomass) with view point of pollution reduction [Volume 14, Issue 2, 2021, Pages 63-86]
-
Combustion Regime
Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
-
Computational Fluid Dynamics
An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
-
Configuration of Counter-flow
Numerical study of different flame regimes in the laminar counterflow spray [Volume 14, Issue 1, 2021, Pages 29-46]
-
Cryogenic injection and mixing
Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
D
-
Deflagration-to-detonation transition
Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
-
Density stratification
Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
-
Desulfurization
Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2021, Pages 19-36]
-
Diesel injection timing
Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
E
-
Eddy dissipation
Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
-
Emission
Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
-
Emission reduction
Numerical simulation of the effect of the air-fuel ratio on NO emission reduction in a gas turbine combustor with a double swirler [Volume 14, Issue 2, 2021, Pages 123-145]
-
Exhaust Gas Recirculation
Influence of exhaust gas recirculation and TiO2 nanoadditives on performance and exhaust emission characteristics of ethanol/biodiesel/diesel blends in a compression ignition engine [Volume 14, Issue 3, 2021, Pages 59-97]
-
Experimental test
The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2021, Pages 1-18]
-
Experimental Testing
Experimental and Numerical Investigation of Atomization characteristics of Diesel and Mazut Fuel injected from a Pressure-Swirl Atomizer [Volume 14, Issue 3, 2021, Pages 33-58]
-
Extinction
The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2021, Pages 1-18]
F
-
Fixed bed reactor
Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
-
Flamelet generated manifold
Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
-
Flame Structure
Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
-
Flame transfer function
Investigation of the Effect of Chemical Kinetics and Combustion Model on the Flame Transfer Function of a Diluent Premixed Gas Turbine Using LES [Volume 14, Issue 4, 2021, Pages 37-60]
-
Flash evaporation
Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
-
Full factorial
Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
G
-
Gas turbine model combustion chamber
Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
-
Gross indicated efficiency
Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
H
-
Heat recovery boiler
Analysis and modeling of heat recovery boiler with using of new fuels (biomass) with view point of pollution reduction [Volume 14, Issue 2, 2021, Pages 63-86]
-
Hydrogen production
Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
-
Hypergolic Oxidizer
Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
I
-
Ignition
The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2021, Pages 1-18]
-
Infinite chemistry
Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
-
Inhomogeneous mixture
Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
K
-
Keywords: Flame quenching
Experimental study of flame quenching phenomenon of mixed methane and air in the presence of perforated plates and porous barriers in a closed chamber [Volume 14, Issue 2, 2021, Pages 87-100]
-
Keywords: Nanoparticles
Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
-
Kinetic
Six-lumped kinetic model for catalytic cracking of heavy gas oil over zeolite Y; considering deactivation catalyst [Volume 14, Issue 1, 2021, Pages 47-60]
L
-
Laminar Flow
Numerical study of different flame regimes in the laminar counterflow spray [Volume 14, Issue 1, 2021, Pages 29-46]
-
Large Eddy Simulation
Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
M
-
Maximum Entropy
Experimental and Numerical Investigation of Atomization characteristics of Diesel and Mazut Fuel injected from a Pressure-Swirl Atomizer [Volume 14, Issue 3, 2021, Pages 33-58]
-
Melting
An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
-
Methane
Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
-
Mixing layer
Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
N
-
Natural gas
An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
-
Natural gas
Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2021, Pages 85-99]
-
Non-premixed combustion
Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
-
NOx
Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
-
Numerical simulation 3D
Numerical simulation of the effect of the air-fuel ratio on NO emission reduction in a gas turbine combustor with a double swirler [Volume 14, Issue 2, 2021, Pages 123-145]
-
Numerical Solution
Experimental and Numerical Investigation of Atomization characteristics of Diesel and Mazut Fuel injected from a Pressure-Swirl Atomizer [Volume 14, Issue 3, 2021, Pages 33-58]
O
-
OpenFOAM
Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2021, Pages 100-122]
-
Oxidant Composition
Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
P
-
Pressure-Swirl Injector
Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
-
Pyrolysis
Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
R
-
Radiation
Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2021, Pages 85-99]
-
RCCI combustion
Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
-
Reactive Mach stem
Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
-
Response sesurface methodology
Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
-
Response Surface Methodology
Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
-
Rice Husk Ash
Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
-
Rocket
Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2021, Pages 61-84]
-
Rose Damascena waste
Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2021, Pages 19-36]
S
-
Sensitivity analysis
Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
-
Silica
Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
-
Simultaneous Combustion
Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2021, Pages 61-84]
-
Specific Impulse
Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2021, Pages 61-84]
-
Spray Combustion
Numerical study of different flame regimes in the laminar counterflow spray [Volume 14, Issue 1, 2021, Pages 29-46]
-
Syngas
Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
T
-
Thermal Condition of Wall
Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
-
Thermal efficiency
Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2021, Pages 85-99]
-
Thrust
Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2021, Pages 61-84]
-
Thrust
Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2021, Pages 100-122]
-
Titania
Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
-
Transcritical condition
Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
-
Transcritical injection.supercritical flame
Investigation of Transcritical Shear flow’s Dynamics in the GH2/LOX and GCH4/LOX Cryogenic Flames with Real Gas SLFM [Volume 14, Issue 1, 2021, Pages 1-27]
-
Transient Thermal Numerical Simulation
Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
-
Turbulent Combustion
Assessment of the progress variable variance modelling on large-eddy simulation of turbulent premixed flames using flamelet-generated manifold model [Volume 14, Issue 4, 2021, Pages 124-145]
-
Turbulent jet
The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2021, Pages 1-18]
W
-
Water Splitting Reaction
Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
Z
-
Zeolite Y
Six-lumped kinetic model for catalytic cracking of heavy gas oil over zeolite Y; considering deactivation catalyst [Volume 14, Issue 1, 2021, Pages 47-60]
Your query does not match with any item